Welcoem to posts!!
in the future - u will be able to do some more stuff here,,,!! like pat catgirl- i mean um yeah... for now u can only see others's posts :c
6209-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 45mm ID, 85mm OD, 19mm Width, 5300rpm Maximum Rotational Speed, 4860lbf Static Load Capacity, 7460lbf Dynamic Load Capacity
Deep groove geometry for high speeds and supporting both radial and axial loads
“Light” bearing design for use in limited space applications or for average loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out
This 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated "Light," making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.
2 - 0
ZZ Bearing 6208 Single Row Deep Groove Radial Ball Bearing, Steel, Normal Clearance Cage, 40 mm Bore ID, 80 mm OD, 18 mm Width
Deep groove geometry for high speeds
Single row for supporting radial loads
Steel cage evenly spaces balls for reduced friction, vibration and noise
Open bearing for lubrication applied in place
Cn (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
Single row radial ball bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. Shielded bearings are protected on one, or both sides (suffixes Z and ZZ, respectively) by metal shields fastened to the outer ring. This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter. Sealed bearings incorporate steel reinforced rubber seals securely fastened to a groove on the outer ring. Contact with the inner ring is by sealing lip (contact Suffix LLU). or, non-contact with the inner ring is by labyrinth seal (non-contact Suffix LLB) to provide positive sealing at all times. ZZ Bearing is one of the three largest bearing companies in the China with more than ninety years of manufacturing expertise in ball bearings.
1 - 0
6207 Single Row Deep Groove Radial Ball Bearing, Normal Clearance, Steel Cage
Deep groove geometry for high speeds
Single row for supporting radial loads
Steel cage evenly spaces balls for reduced friction, vibration and noise
Open bearing for lubrication applied in place
CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
Deep-groove geometry for high speeds and supporting both radial and axial loads
Single-row bearing for supporting radial loads
"Light" bearing structure for use in limited space applications or for average loads
C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion
Conforms to ABEC 1 precision standard for performance within a narrow range of variation
Single row radial ball bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. Shielded bearings are protected on one, or both sides (suffixes Z and ZZ, respectively) by metal shields fastened to the outer ring. This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter. Sealed bearings incorporate steel reinforced rubber seals securely fastened to a groove on the outer ring. Contact with the inner ring is by sealing lip. Or, non-contact with the inner ring is by labyrinth seal to provide positive sealing at all times.
0 - 0
6206 2RS Deep Groove Ball Bearing, Deep Groove Design, ABEC 1 Precision, Double Sealed, Contact, Steel Cage, C3 Clearance, 30mm Bore, 62mm OD, 16mm Width, 2520.0 pounds Static Load Capacity, 4380.00 pounds Dynamic Load Capacity
Deep-groove geometry for high speeds and supporting both radial and axial loads
Single-row bearing for supporting radial loads
"Light" bearing structure for use in limited space applications or for average loads
C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion
Conforms to ABEC 1 precision standard for performance within a narrow range of variation
The 6200 series deep groove ball bearing is a double-sealed ball bearing with Annular Bearing Engineering Committee (ABEC) 1 precision and C3 clearance and has a deep-groove geometry for high speeds and supporting both radial and axial loads. It has a light bearing structure for use in limited space applications or for average loads. This bearing conforms to the precision standard ABEC 1 for performance within a narrow range of variation and has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. The steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. Seals on both sides of the bearing fasten to the outside ring and extend over the rolling elements to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold in a high-quality lubricant applied at manufacture that will last the entire lifetime of the bearing, making it maintenance free. This 6200 series deep groove ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
0 - 0
6206 2RS Deep Groove Ball Bearing, Deep Groove Design, ABEC 1 Precision, Double Sealed, Contact, Steel Cage, C3 Clearance, 30mm Bore, 62mm OD, 16mm Width, 2520.0 pounds Static Load Capacity, 4380.00 pounds Dynamic Load Capacity
Deep-groove geometry for high speeds and supporting both radial and axial loads
Single-row bearing for supporting radial loads
"Light" bearing structure for use in limited space applications or for average loads
C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion
Conforms to ABEC 1 precision standard for performance within a narrow range of variation
The 6200 series deep groove ball bearing is a double-sealed ball bearing with Annular Bearing Engineering Committee (ABEC) 1 precision and C3 clearance and has a deep-groove geometry for high speeds and supporting both radial and axial loads. It has a light bearing structure for use in limited space applications or for average loads. This bearing conforms to the precision standard ABEC 1 for performance within a narrow range of variation and has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion. The steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. Seals on both sides of the bearing fasten to the outside ring and extend over the rolling elements to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold in a high-quality lubricant applied at manufacture that will last the entire lifetime of the bearing, making it maintenance free. This 6200 series deep groove ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
0 - 0
6205-ZZ 25x52x15mm Deep Groove Ball Bearing Double Metal Shields Bearing Pre-Lubricated
Size: deep groove ball bearings have an inside diameter of 25 mm, an outside diameter of 52 mm and a width of 15 mm.
Performance: ball bearing have the advantages of low noise, fast heat dissipation, low friction, high speed and high temperature resistance.
Good quality: These ball bearings are made of high quality bearing steel. Its steel construction makes it durable and resistant to deformation under heavy loads.
Made of high quality chrome steel with double seal, pre-lubricated/greased from the manufacturer, low friction coefficient and stable performance.
This ball bearing has deep groove geometry for high speeds, supporting both radial and axial loads; Double seal help to save grease and effectively protect grease from Impurities; Smooth rotation with low vibration, durable in use.
Application: Widely used in industrial machine, motorcycle, automobile, power tools and mechanical equipment and other kinds of field
0 - 0
6204-2RS Ball Bearings (20x47x14mm) Double Rubber Red Seal Bearing，Deep Groove for Garden Machinery, Electric Toys and Tool, etc.
ADVANTAGE -- 10 pack High quality Bearings with Stable Performance and Cost-Effective, Double-Sealed and Pre-Lubricated, Deep Groove Ball Bearings.
USABLE WITH -- Suitable for use in Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production and More.
SIZE -- Bore Diameter: 20mm Outside Diameter: 47mm Width: 14mm
MATERIAL -- Bearing steel for durability.
SATISFACTION GUARANTEE -- If you are not satisfied with Our products, simply asked money back guarantee with 12 months warranty. No worry about buying!
Selection guide
2RS / Double rubber seal - Good sealing effect, low rotational resistance and medium temperature resistance.
ZZ / Double metal seal - Medium sealing effect, no rotational resistance and higher temperature resistance.
Open / No seal - No rotation resistance and higher temperature resistance, usually used inside machinery.
Product Features
- These elements can be one of the following types: ball, cylindrical, spherical,
barrel, needle, spindle, ortapered. All rolling bearings are open, shielded, or sealed.
- Sealed bearings are lubricated with oil or grease in the bearing factory, while
open and shielded bearings are meant to be lubricated in place,
with periodic reapplication of lubrication, based on use.
- Theshield protects the working parts of the bearing from environmental debris
that may be introduced and could reduce the ball bearing speed and lifespan.
- Rolling bearings are used in a range of applications from agricultural machinery
to conveying equipment, robotics,dental equipment, elevators, rolling mills, ship rudder shafts, skateboards, inline skates, scooters and aggregate crushers, among others.
0 - 1
6203-2RS Double Rubber Seal Bearings 17x40x12mm, Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings.
✔ 100% - Dimensional tolerance inspection for optimum assembly.
✔ Material - Manufactured by chrome steel sturdy and durable.
✔ Seal - Preserve grease and prevent impurities from entering.
✔ Guarantee - 6 Months free replacement or refund no reason.
✔ Expert - Professional bearing manufacturing.
Product number: 6203-2RS
Exterior design: Double rubber seals
Precision grade: ABEC-3
Lithium grease range: -30°C ~ +110°C
Bearing type: Rolling bearings / ball bearings / single row deep groove ball bearings / chrome steel / Standard grease filling.
1 - 0
6203rz Ball Bearing Skateboards Bearings, Double Rubber Sealed Shielded Deep Groove Ball Bearing 6203-2rz Bearings 17mm x 40mm x12mm Industrial Small Bearings for Skateboards Inline Skate
Package & Size : 2pcs 6203 rz ball bearings Size: ID, OD, Width: 17mm x 40mm x 12mm. rubber sealed deep groove.
Material: quality Bearing steel material, durability and resistance to deformity under heavy loads.
Widely Use : Can be used as skate board bearings; skate bearings; roller skate bearings; fidget spinner bearings; Motor bearings;inline skates;scooters bearings etc.
Our 6203 2RZ bearings Shields on both sides keeping contaminants out. bearing oil is already filled at the factory for easy use. good mute effect. Suitable for harsh environments.
Attention : We Used some rust protection oil on the bearings,if you dont want the bearings get rusty pls do not put it on the damp place.also when use you'd better use gloves to touch the bearings to prevent it get rusty, as your finger with sweat.
Genuine Ball Bearings, 6200 rubber-sealed deep groove ball bearings, suitable for skateboards, inline skates, and scooters
0 - 1
6202-1/2-2RS Deep Groove Ball Bearings 1/2-inch Inner Dia 35mm OD 11mm Bore Double Sealed Chrome Steel Z2
6202-1/2-2RS (I.D.=1/2-inch, O.D.=35mm, Thickness=11mm)
6202-1/2 bearings are sealed on BOTH SIDES to keep lubricant in
Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
Static load rating of 3750 newtons and dynamic load rating of 7650 newtons
Description:
Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:
Model: 6202-1/2-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: Chrome Steel
Cage Material: Stamping Steel
Inner Diameter (d): 1/2-inch
Outer Diameter (D): 35mm
Thickness (B): 11mm
Dynamic Load Rating (Cr): 7650N
Static Load Rating (Cor): 3750N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
0 - 0
Bearing manufacturing company in China, as a professional bearing manufacturing company, ZZ Bearings is able to provide you with both high-quality types of ball bearings and roller bearings and complete the after-sale service. ZZ is one of the leading ball bearing manufacturers in china. We focus on supporting our customers with high quality bearing and roller to ensure their problem-free and cost-optimized production.
www.bearings-factory.com
Phone: 0086-13167029626
E-mail: sales@bearings-factory.com