01:15

Removing masking tape easily.

02:06

Making a fast, easy fret crowning tool.

03:37

Epoxy resin top.

05:49

gluing on the knotty cedar boards for a table top.

02:46

October 29, 2023

11:32

installing knotting tung and grove boards on the inside of your house.

05:23

Scraping finish off the binding

06:39

Touching up spots as you are doing a finish.

01:19

Fret job complete.

03:49

Polishing frets

03:04

Dressing the fret ends.

02:58

Checking with a rocker to find high spots on the frets.

03:11

Leveling and crowning frets

03:15

Filling in chips on the fret board from fret removal.

04:31

Flush cutting and beveling fret ends.

03:16

Pressing in frets with a drill press.

09:06

Sanding blocks and technique.

02:46

Polished fret board before installing the frets.

02:12

Radiusing a fret board.

03:48

Preparing a fret board to radius.

06:21

Removing frets my way.

01:39

Finished from filling in bad route.

03:17

Top and nut plugs

04:06

Filling in the locking nut holes

06:49

Gluing in the blocks to fill in the top of this repair.

03:05

Routing the top of the curve top guitar.

00:58

finished on the back side of plug.

02:47

Sanding down wood block I installed to fill in hole.

03:35

installing the wood blocks to fill in the trem hole

01:07

Routing out preparing to fill with solid block.

02:29

Filling in a bad attempt of making a tremolo Les Paul.

01:40

completed removing neck back bow

03:10

cont. repairing a back bow neck.

03:26

Leveling a guitar neck after steaming and clamping to make the neck straight.

02:27

Bending a neck with steam to remove back bow.

03:31

Trying to bend a guitar neck back to straight.

04:07

Wet sanding process up until buffing.

02:00

preparation on a guitar body filling holes before finishing.

03:29

Guitar kit build.

06:39

Repairing a cracked headstock

00:36

Magnetic back plates

02:34

Installing hardware on your new guitar build.

05:33

Preparing hardware on a new build.

02:04

One step before buffing wheel on a new finish.

04:17

Wet sanding in between coats of laquer on the body of a guitar.

00:28

Magnetic covers

07:35

Wet sanding in between coats of laquer on a guitar neck.

01:28

Kevin Lee playing his signature model custom guitar by D.Drew guitars.

01:11

Kevin Lee playing his signature model

09:09

Wet sanding in-between coats

15:28

Gluing the back on a electric guitar.Part 4

20:57

Gluing on the back of the guitar. Part 3

06:52

Bending a guitar back to the body before gluing it on.

01:48

clamping a book marked back cover

20:33

Gluing on a guitar top by hand. Part 2

21:42

Gluing a top on a guitar body by hand.

03:43

mirror type finish

07:43

Creating a mirror type finish

02:57

December 26, 2020

19:42

Gluing a fret board on to a neck.