https://www.cumminsforum.com/threads/engine-restore-anyone-use-it.2542436/
So dad used some engine restore. The oil consumption slowed way down. It got to the point best I can remember that it made it to its oil change interval with out needing any oil added . That engine restore works ! I used to thing stuff like that was a waste of time and snake oil. But engine restore did work for my moms ml320.

https://www.youtube.com/watch?v=Hr8jIwVyIFE
I added restore to a turbo diesel engine with low compression. I tested compression before and after adding Engine Restorer (Restore).Products Tested In Thi

https://www.hagerty.com/media/maintenance-and-tech/how-diesel-fuel-can-restore-engines-power/
Instead, a diesel engine compresses the clean intake air charge until it is hot enough to compression ignite the fuel and that is the precise moment an injector sprays a measured fine mist of fuel into the cylinder. This mist ignites and burns, forcing the piston down, converting the potential energy of the fuel to the kinetic energy of piston

https://rxmechanic.com/engine-restore/
To get the best of Engine Restore, it is recommended that you use 40ml for each 1.6liters of engine capacity you are treating. That translates to 2 cans for a 3.2-liter engine, and 3 cans for a 4.8litre engine. You must stick to this "dosage" if you want optimum results.

https://www.restoreusa.com/more-information/frequently-asked-questions
Can RESTORE be used in diesel engines? Yes, RESTORE is effective in diesel engines. We recommend using it only in diesel engines that have "common rail" fuel injection systems. It is not formulated for use in HEUI fuel systems which are used in Ford Powerstroke diesel engines and some other types of diesel engines.

https://www.restoreusa.com/index.php
RESTORE Engine Restorer & Lubricant ® Mile after mile, friction gradually wears out every car's engine resulting in microscopic leaks between the piston rings and cylinder walls. In high-mileage engines these small leaks are the reason for loss of compression during the compression stroke and excessive blow-by during the combustion stroke.

https://bobistheoilguy.com/forums/threads/restore-engine-restorer.290941/
40,794. Location. NY. Jun 10, 2018. #5. It reportedly works in oil burners, and engines with low compression on their last leg. It fills cylinder imperfections with soft metals. It helps raise compression and reduce oil consumption. It is supposed to pass through the filter, but the engine must be treated with the stuff at every oil change.

https://rislone.com/products/high-mileage-4-6-8-compression-repair/
Rislone® High Mileage Compression Repair with Ring Seal is a concentrated proprietary blend of high-shear and premium polymers developed for higher mileage engines that are suffering from decreased or uneven compression. Low compression can be caused by normal engine wear and decreased sealing between the piston rings and cylinder walls.

https://www.dieselworldmag.com/diesel-technology/diesel-restoration-whats-it-really-take/
New window regulators, door locks, a modest stereo is another $2.5K. Plus there will be a thousand for those unforeseen things that will always pop up. To do the entire drivetrain (engine, trans, and rearend) I came up with roughly $15K. Throw a paint job, new lights, bumpers, mirrors, plastics and chassis bushings its way for a few thousand

https://www.fueltechexperts.com/restore-compression-loss-remove-engine-glaze/
This includes generators, but the issue is more commonly attributed to marine engines. Removing cylinder glazing will enable the piston rings to re-seat against the liner and ensure the lubricating oil can lubricate and protect as intended. ReleaseTech can restore such engines of any size, reducing oil consumption and excess exhaust smoke.

https://bobistheoilguy.com/forums/threads/engine-restorer-vs-rislone-compression-repair.151037/
Mar 24, 2011. #2. If you have blowby, the oil will get dirty quick. I would use an inexpensive dino oil and change it often. Going a grade heavier may help, but nothing in a can will really help at this point, change the oil often say 2k or so to delay the inevitable.

https://fuelflowpro.com/how-to-rejuvenate-old-diesel-fuel/
To summarize, the signs of old diesel fuel include a dark color, sediment or sludge, and a foul odor. These signs indicate the degradation of the fuel and can have negative effects on engine performance. Regular fuel sampling and testing, along with proper fuel storage and maintenance, are vital to ensure the longevity of your diesel engine.

https://bryansgarage.com/does-engine-restore-work/
Conventional wisdom recommends using 40 ml of Engine Restore for every 1.6 liters of engine oil capacity the car handles. This way obtains the most outstanding results. That equals 2 cans for a 3.2-liter engine and 3 for a 4.8-liter engine, respectively. If you want the best outcomes, follow this "dosage" strictly.

https://www.youtube.com/watch?v=HFSOMgEu8xI
Complete Engine Repairing and Restoration How to diesel engine repairing - Repairing Damaged Old Tractor Engines - Restore Old 22HP Diesel Engine | Restore L

https://www.youtube.com/watch?v=doSp1Wutep4
Fully Restoration Antique Diesel Engine | Restore and reuse old and rusty diesel enginesDiesel engine, also known as internal combustion engine or CI engine,

https://community.cartalk.com/t/engine-restore-too-good-to-be-true/28740
RESTORE is a SAE-30 high performance motor oil containing billions of micro-particles of the proprietary formula CSL (Copper 60%, Lead 40%, Silver trace) in suspension. RESTORE is suitable for any engine, whether petrol, diesel, dual-fuelled or lpg and is safe to use in turbo-charged engines and vehicles with catalytic converters as it does not

https://www.amazon.com/Restore-00016-8-Cylinder-Restorer-Lubricant/dp/B00HJVEX74
Restore Engine Restorer & Lubricant is a high performance oil additive that increases compression in older high-mileage engines. The unique CSL formula fills worn areas of the cylinder walls to reduce blow-by and restore compression to near original levels. Restoring cylinder compression improves combustion to increase horsepower, reduce oil

https://www.wikihow.life/Restore-Lost-Power-in-an-Old-Car
If the engine starts, there is still fuel being fed to the engine. 5. Disconnect the pressure regulator and open the fuel filler cap. This is to prevent excess pressure from building up in the fuel tank. 6. Add the fuel injector cleaner into the canister that comes with the fuel injector cleaner kit.

https://www.grit.com/departments/old-engines-zm0z13mjzgou/
The next step in reviving a neglected engine is to drain the old oil. "Look for water or coolant in the oil," says Casey, who super-tuned my 1948 Farmall Cub tractor so it purrs like a contented kitten. "The liquid will come out first. Finding water from condensation is fairly normal after years of weather fluctuations.

https://www.motortrend.com/how-to/1701-reviving-and-restarting-your-old-engine/
Before you go wire up a battery, slosh some fuel down the intake, and turn the key, it is good practice to do a few other actions. These things may just save you from ruining what may have been a

https://www.youtube.com/watch?v=ymCPjWpJyPk
Repair and restore diesel engines. Restore old to new | genius girlWelcome to our channel! In this fascinating video titled "Reviving Relics: Diesel Engine R

https://www.ford-trucks.com/forums/82151-restore-engine-treatment-anybody-used-it.html
Restore Engine Treatment - Anybody Used It ? Duralube and Slick 50: I think one or both have that Teflon stuff that somewhere I heard can clog engines. I won't use any crankcase additive but Rislone. I have used Rislone (1 quart every oil change) for 25 years.

https://www.spokesman.com/stories/2024/jun/24/then-and-now-trues-oil-company/
He founded True's Oil Company around 1900, focusing on sourcing and delivering heating oil before moving to fuels for internal combustion engines. Lorenzo L. True was born around 1844 and grew

https://www.youtube.com/watch?v=jSwJU46lKpM
Restoration old D8 diesel engine | Restore and reuse old and rusty D8 diesel enginesDiesel engines, also known as combustion engines or CI engines, are named