https://www.youtube.com/watch?v=AizBLBHdrNM
How to fix the upgraded toilet Korky Anti Siphon 528. The water keeps on running in the toilet tank and doesn't want to stop. How to fix the upgraded toilet Korky Anti Siphon 528.

https://www.youtube.com/watch?v=R0IuAVUu-A0
If you have a Korky toilet fill valve that keeps running, cleaning or replacing the top cap and seal usually solves the problem. I show the steps to remove a

https://www.youtube.com/watch?v=PF6gKvlxICA
If you are having problems with your Korky QuietFill toilet Fill Valve, follow this easy trouble shooting guide!Korky® QuietFILL® Toilet Fill Valve Universal

https://www.korky.com/toilet-repair-help/running-toilet
Turn off your water supply. Wait for a minimum of 25 minutes. If your water level drops below the pencil mark, you have a leak in your tank. Leave the water off for a couple of hours and see where the water level drops. If the water level drops to the flapper, you need to replace your flapper.

https://www.korky.com/toilet-repair-help
Toilet Troubleshooting Guide. Do want to learn how to repair a toilet? Our troubleshooting guide will help you learn to diagnose common toilet problems, and help you fix your toilet. With step-by-step instructions, installing and repairing Korky products is easy, even for beginners! Our innovative solutions are designed to simplify the repair

https://terrylove.com/forums/index.php?threads/how-fix-delayed-fill-with-korky-528mp-fill-valve.83737/
I have the Korky 528MP fill valve that is often recommended on this forum. Installed it a couple years ago, but it is now having a problem where after flushing, there's a delay before it turns the water on. The delay used to be maybe 20 seconds and it's getting worse and now takes a few minutes, but works fine once it finally turns on.

https://www.familyhandyman.com/project/how-to-fix-a-running-toilet/
Flush the toilet to drain out most of the water, then unhook the old flapper. Buy a new flapper of the same type and install it according to the instructions on the package. Hook the flapper chain onto the flush lever arm so there's a little slack when the flapper is closed. Family Handyman. Step 2.

https://www.wikihow.com/Fix-a-Running-Toilet
2. Shut off the water and drain the tank. If the water still won't stop pouring in from the fill valve, your fill valve is faulty and needs to be replaced. Close the valve that feeds into the wall and drain your tank by flushing it. [8] Put a bucket under the fill valve where your supply line feeds into the tank.

https://www.korky.com/support/frequently-asked-questions
If your toilet is running or flushing on its own, sometimes referred to as ghost flushing, it is time to replace your flapper. For less than $20 and 10 minutes, you can replace your flapper, which often-times will fix your toilet issues. Most Korky flappers have a 5-year warranty. Our 2" Ultra 2X High-Performance Toilet Flapper (2017) and Large

https://www.youtube.com/watch?v=XLGx0WXmBqY
Join me as I show you how to work on a Korky anti-siphon toilet fill valve

https://www.familyhandyman.com/project/how-to-stop-a-running-toilet/
Reattach the fill tube and push it firmly onto the fill valve. Make sure it perches about 1 in. above the rim of the overflow tube and that the fill tube sends water into the toilet overflow tube. Flush the toilet and watch the water stream to make sure it goes down the toilet overflow tube. Step 2.

https://www.homedepot.com/c/ah/how-to-fix-a-running-toilet/9ba683603be9fa5395fab90138bd8691
Lift up on the fill valve arm. If the water stops, the fill valve needs to be adjusted. To adjust the fill valve, turn the screw in the indicated direction until the water is about 1/4" below the top of the fill tube. You'll need to "reboot" the toilet by flushing it between adjustments to see if it's right.

https://www.youtube.com/watch?v=08gPcuq74FM
Learn more | https://www.korky.com/toilet-repair-help/loud-or-broken-fill-valveHello and Welcome to Korky toilet repair.Here are some quick helpful tips if y

https://www.homedepot.com/p/Korky-QuietFill-Toilet-Fill-Valve-528/100023407
Designed to fix no/slow refilling, running, and noisy toilets, the Korky QuietFILL Toilet Fill Valve is quieter than other fill valves. It has a universal design to fit all brands and features a wide range of adjustability to fit most 2-piece and 1-piece toilets. The QuietFILL Fill Valve is very easy to install and adjust; no tools are required. Simply remove your old fill valve or ballcock

https://www.korky.com/toilet-repair-help/how-to-fix-a-slow-filling-toilet
First, turn the water supply valve completely open and make sure the supply line is free of kinks. If the water supply line is bent or needs to be turned on, flush the toilet to check the water flow. If this was not the problem, turn the water supply off. Pinch the refill tube and cover together to ensure the cap on the valve is completely

https://reliefinbath.com/korky-anti-siphon-528-hissings/
How to Fix a Leaking Korky 528 Diaphragm. If cleaning the anti-siphon doesn't solve persistent hissing after the tank has refilled, the rubber diaphragm inside may be damaged and leaking. To replace: 1. Drain Tank. Shut off water and empty tank completely using a sponge or cup. 2. Remove 528 Cap.

https://www.ehow.com/how_6770598_repair-leaking-anti_siphon-valve-toilet.html
Step 4. Install the washer that came with the valve onto the threaded connection and insert the connection in the hole in the bottom of the tank. Screw on the lock nut and, pressing down on the fill valve's lower shank, tighten the lock nut securely by hand. Hook the refill tube connected to the outlet on the valve to the overflow tube with the

https://terrylove.com/forums/index.php?threads/brand-new-korky-fill-valve-leaking.71798/
Sometimes, it's a good idea to remove the seal, put a glass or something over the top, then turn the water back on for say 10-seconds to purge out any crud. Then, reassemble it. That can make the difference in some things working verses leaking, depending on the condition of your pipes and your water supply.

https://www.youtube.com/watch?v=L20V0_QQlyE
If your toilet won't stop filling or it's hissing, the fill valve may need to be flushed free of debris. This short video shows you how to clean out a Gmax f

https://www.familyhandyman.com/list/why-wont-my-toilet-flush/
Toilets with this problem usually experience "phantom flushing" as the fill valve cycles on repeatedly to replace the water lost through the flapper. You may also see swirling water or bubbles in the tank. Fixes to try. Hold the flapper down. For a quick fix, hold the flapper (or canister) down until the tank fills with enough water for a

https://terrylove.com/forums/index.php?threads/korky-528-anti-siphon-noise-tukatukatukatuka.47902/
We have a Korky 528 Anti-Siphon on our toilet, and it recently started making a noise that sounds like a mix between something going "tukatukatuka" and a steam locomotive barreling down the rails. ... that's how you adjust the water level in the tank, by moving the head of the valve up or down. This is why we're constantly-saying to hold it in