https://www.fallprotect.com/blog/techtalk/srls-vs-lanyards-choosing-the-correct-ppe-for-your-fall-protection-application
Budget is the simplest part of the equation. As PPE (personal protective equipment) goes, lanyards are less expensive than SRL's, so when cost is the primary concern, lanyards often get the nod. That said, lanyards are not always the best option due to a concept called total fall clearance distance. For our purposes, we will define this

https://www.premiersafety.com/blog/selfretracting-lifeline-vs-lanyard-which-is-right-for-you/
Self-Retracting Lifeline (SRL) Lanyard. Function. Automatically retracts and extends to minimize fall distances. Provides a fixed-length connection between the user and the anchor. Work Radius. Offers greater mobility due to retractable line. Fixed length limits movement. Fall Arrest.

https://www.fallproof.com/blog/self-retracting-lifelines-versus-shock-absorbing-lanyards-which-should-you-use/
If you ask most people who use lifeline systems, they would probably tell you that they prefer to use an SRL over a lanyard. If you have questions about this topic and or would like to speak with one of our experts, give us a call. They will be glad to help. Click to Call. or. dial us at 1- (855) 279-2000.

https://pwiworks.com/self-retracting-lanyard-srl-vs-shock-absorbing-lanyard/
Self-retracting lanyards are considerably more expensive than a standard shock-absorbing lanyards with costs ranging from $130 to $800. It is always advised to work on the plumb line from the anchor point when using any lanyard and the increased length of an SRL (up to 50 feet) increases the chances of a swing fall.

https://blog.falltech.com/the-essential-guide-to-self-retracting-lifelines
Pull out 50% of the lifeline, maintaining light tension on it, then let it retract. Repeat the test after pulling out 100% of the lifeline. Always keep light tension to keep the lifeline from retracting too quickly. All movement, in or out, should be smooth. Finally, conduct a braking test.

https://www.rigidlifelines.com/blog/what-is-the-difference-between-a-self-retracting-lifeline-and-a-fall-protection-lanyard/
Like fall protection lanyards, self-retracting lifelines consist of webbing or wire rope. They serve as the connection between a worker's body support and an anchor point, and their lengths vary depending on the job requirements. Like seat belts, they automatically retract into an overhead housing unit. If a worker falls, an SRL will use an

https://www.youtube.com/watch?v=4OISf_Ka_18
It's time to swap out the less expensive lanyards as part of your fall protection program and updating to a safer retractable or SRL. Take a lot of the vari

https://blog.msasafety.com/7-tips-for-where-when-and-how-to-choose-and-use-self-retracting-lifelines-srls/
The SRL manufacturer should be able to help with specification options. Application, too, plays a crucial part in determining the proper SRL for the job. For example, working with solar panels on a rooftop or servicing an aircraft wing obviously require care in order to prevent the equipment from damaging products and surfaces.

https://blog.gosafe.com/how-to-choose-the-right-connecting-device-fall-lanyards-vs.-srls
Energy Absorbing Lanyards. Energy Absorbing Lanyards are one of the simplest fall arrest devices. Composed of webbing or cable, they are most commonly built at a length of no more than 6 feet. Energy Absorbing Lanyards have either internal or external shock-absorbing functionality. Both are suitable for fall arrest.

https://selectsafety.net/fixed-lanyard-vs-self-retracting-lanyard/
One advantage is that a self-retracting lifeline is always at full extension, meaning that there is less chance of tripping or entanglement. They are also less likely to become tangled or knotted, which can be a hazard with a fixed lanyard. Another advantage of self-retracting lanyards is that they provide constant tension, which keeps the user

https://safekeepersafety.com/lanyard-or-srl/
The 6-foot lanyard is the standard size. Lanyards designed for fall arrest have either an internal or external shock absorbing functionality that stops a falling worker once the slack in the lanyard is gone. An SRL consists of a web or cable lifeline, and they are available in much longer lengths. They contain an internal braking mechanism that

https://www.tractel.com/safetygate/self-retracting-lifelines-vs-safety-lanyards-which-is-best-for-your-job/
Self retracting lifelines (SRL) are designed using webbing, wire rope, or a cable that automatically retracts into a housing unit, never allowing for any slack in the line. SRLs are longer than lanyards and permit a larger working radius, even when using a fixed anchor point—which is typically overhead. A breaking mechanism inside the housing

https://www.fallprotect.com/blog/techtalk/lanyard-srl-pfl
When looking beyond cost, remember, lanyards are not always the best option because they require more fall distance clearance than a self-retracting lifeline or personal fall arrest system. You'll pay more for SRL's and PFL's but retractable connecting devices arrest falls faster than lanyards. During a fall, the braking mechanism inside

https://www.powerpak.net/blog/construction-work-lifelines-understanding-srds-srls-and-srlrs/
SRDs (Self-Retracting Devices) SRD (self-retracting device) and SRL (self-retracting lifelines/lanyards) are two names for the same thing. Most companies use the term SRD for personal-sized devices and SRL for personal-sized and larger mounted devices. We use the term SRD, but you may hear SRL elsewhere.

https://maltadynamics.com/what-is-the-difference-between-a-self-retracting-lifeline-and-a-lanyard/
The visual difference is that a lanyard is a section of webbing or rope like material with a way to arrest your fall. It is one standard length and it attaches to the D-ring on your harness along with what you are tying off to. The self-retracting lifeline is more complicated and has a housing unit. The cable is spooled up with a breaking

https://blog.msasafety.com/self-retracting-lifelines-101-everything-you-need-to-know-about-srls-and-pfls/
That's why only Class 2 SRLs specifically designed and approved for a leading edge must be used. When to use web vs. cable SRLs? When choosing an SRL, you might wonder about the different advantages of web and cable SRLs. Stainless and galvanized steel cable SRLs are well-suited for harsh environments.

https://www.safeopedia.com/safety-moment-choosing-the-right-fall-protection-lanyard/2/1530
Advertisement. Unless you're using travel limiting devices or retractable lanyards, fall arrest system lanyards need to be equipped with shock absorbers that limit fall force to less than 1,800lbs (8kN). Make sure to note the lanyard's length when it is fully deployed and make sure that the total fall distance is calculated correctly.

https://www.rigidlifelines.com/blog/self-retracting-lanyard-srl-vs-energy-absorbing-lanyard-eal-who-reigns-supreme/
If a worker were wearing an SRL, the SRL would most likely continue to pay out slack as the worker continued to sink deeper into the silo. But, if a worker is wearing an EAL, they will run out of material more quickly and will not travel any further than the length of their lanyard.

https://fallprotectionxs.com/blog-self-retracting-lifeline-explained/
A self-retracting lifeline is a type of lanyard that allows a user to move around freely within an area. The lanyard rolls out and retracts based on the user's movement. The retracting function ensures the lifeline is always kept taut. When a sudden increase in speed is detected, e.g. a fall, the automatic speed brake is activated and the

https://www.fallproof.com/blog/self-retracting-lifelines-exploring-the-different-types-and-their-purpose/
One of the major differences in SRLs is the type of material that the lanyard cable is made of. (The lanyard is the actual "lifeline" component of the Self-Retracting Lifeline.) There are three types of lanyards within the SRLs themselves: Stainless Steel Lanyards. Galvanized Steel Lanyards. Nylon/Polyester Synthetic Webbing Lanyards.

https://wssafety.com/fall-limiter-vs-self-retracting-lifeline-what-s-the-difference/
SRLs are more durable. SRLs offer longer lengths. While a PFL has a working length of 6-9 feet, an SRL offers a minimum length of 9 feet and a maximum of 175 feet, depending on the model. A typical SRL is mounted at the anchor point, but the lighter-weight PFL attaches to the D-ring on the back of a user's harness.

https://www.youtube.com/watch?v=7uGjufqCaRY
Here is a video that shows the difference between using a traditional 6ft. tear away lanyard vs a self retracting lanyard (SRL).

https://www.d2000safety.com/self-retracting-lanyards/
When self-retracting lanyards (SRL) were first invented decades ago, they were generally only used in a manner that restricted the freefall to two-feet or less. In other words, the SRL was anchored overhead. But as these devices became more popular, many employers began using them in a variety of ways which, in some cases, was outside of the