https://www.technewstoday.com/fix-hdmi-not-connecting-to-tv/
Choose the Correct Source. Another important thing often overlooked is changing the input source on TV. If you have HDMI device connected, ensure the input source is set to HDMI. Or else, the TV will not detect the device. Changing the input source is pretty similar in most TVs. Press the Source button on your TV remote to switch between sources.

https://www.sony.com/electronics/support/articles/00030375
Disconnect the HDMI cables from all devices and clear the data and cache from the ExternalInputServices app. Try using a different HDMI cable. To view 1080p (60p) quality content on the TV from an external device, make sure to use a High-Speed HDMI cable with the HDMI logo. If there's still no picture, perform a factory reset:

https://www.makeuseof.com/tv-not-playing-video-hdmi-fix/
Your video could be cut off due to a bad HDMI port. If your TV has multiple HDMI ports, connect the input device to a different one. Sometimes, accumulated dust can affect the HDMI connection. You can clean your HDMI ports by applying a burst of compressed air and gently scrubbing with a clean toothbrush and some isopropyl alcohol.

https://www.lifewire.com/fix-hdmi-connection-problems-1846811
Boot up your computer with the HDMI cable connected to a TV that is already on. Boot up your computer while the TV is off and then turn on the TV. Boot up your computer and turn on TV before connecting the HDMI cable. If your TV has a Video Graphics Array (VGA) input you may have to use that instead of HDMI.

https://www.lapseoftheshutter.com/samsung-tv-not-recognizing-hdmi-input/
Hold down the physical power button on the TV for at least 15 seconds. Wait for at least 30 minutes for any residual power to drain from the TV's capacitors (which are capable of storing charge for several minutes). Plug your TV back in and try switching it on. Samsung TV's have their power button underneath the Samsung logo.

https://www.techietech.tech/how-to-fix-hdmi-cable-not-working-issues/
3. Disconnect and Re-connect your devices. Sometimes, a bad connection may occur temporarily and cause the HDMI cable to stop working on your TV/display. It is possible that you haven't plugged the HDMI cable firmly into the ports of your TV and the device.

https://www.sony.co.uk/electronics/support/articles/00030375
Step 1: Check if you are using the correct INPUT. Make sure the TV is set to the correct video input to receive the HDMI signal. Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are

https://www.wikihow.com/Connect-HDMI-to-TV
Connect the HDMI-A plug into a port on the TV. Turn on the TV if you haven't already done so, and then connect the cable securely. If your TV has multiple HDMI ports, take note of the HDMI port number you're using. 4. Connect the other end of the cable to the device or adapter.

https://pointerclicker.com/what-do-you-do-when-your-hdmi-says-no-signal/
2. Unplug, Replug the Cable & Perform a Soft Reset. Sometimes, a simple unplug and replug of the HDMI cable, along with a soft reset, can resolve the "No Signal" issue. Start by unplugging all cables and performing a soft reset by disconnecting your device (TV, monitor, computer, etc.) from power for at least 30 seconds.

https://www.samsung.com/us/support/troubleshooting/TSG01208751/
Disconnect and reconnect the HDMI cable. Disconnect the HDMI cable from the back of the TV and the external device. Then reconnect it firmly to the external device first, then connect it to your TV. If it still doesn't work, try the cable in a different port. Don't forget to select the new source.

https://hecticgeek.com/fixed-hdmi-no-signal-to-tv-or-monitor/
Refer to the TV or monitor manual to understand the type of supported cable to connect. Check the type and speed of the HDMI cable; any mismatch between the two may cause the problem. The different types of HDMI cables available in the market are Standard HDMI:720p/1080p, High-Speed HDMI: Up to 4K, and Ultra-High-Speed HDMI: Up to 10K resolution.

https://pointerclicker.com/tv-hdmi-port-not-working/
Step 2: Turn on the TV and press the Input or Source button on the remote. Step 3: Select the correct HDMI input. Step 4: If the HDMI port doesn't work, try switching the source device and input setting to other HDMI ports. Note: If you're using an AV receiver (or soundbar), the receiver may be faulty.

https://www.sony.com/electronics/support/articles/00023611
Turn off the TV and your source device (satellite receiver, cable box, DVD, Blu-ray Disc player), wait about 60 seconds, and then turn them back on. Check the input selection of your TV again to verify it's set for the input connection used by the source device. Check your HDMI cable connections. Disconnect the HDMI cable from your source

https://www.maketecheasier.com/troubleshoot-tv-no-signal-issue/
You will have to remove the offending device, and that should restore the connection. 5. Change the Input Source of the TV. Switching to the correct input source screen helps resolve the sudden no signal problem for TV. Depending on your television model, you may find additional input modes for TV, AV, video, and HDMI.

https://www.samsung.com/levant/support/tv-audio-video/my-tv-does-not-detect-a-device-connected-via-hdmi/
Step 3. Select Self Diagnosis. Step 4. Select HDMI Troubleshooting from the menu. Step 5. Check the connected HDMI ports in sequential order. Check 5. Connect a different external device to see if it works. · If the new device works, the issue is with the original device.

https://www.samsung.com/latin_en/support/tv-audio-video/my-tv-does-not-detect-a-device-connected-via-hdmi/
Check your TV Source settings. Check your HDMI cable. Use the HDMI Cable Test function for HDMI troubleshooting. Try connecting other devices. Note: If you are having trouble with your Samsung Smart TV, you should always check to see if there are any software updates available as these may contain a fix for your problem.

https://thenextweb.com/news/what-to-do-tv-television-not-enough-hdmi-ports
Powering options. Basically, check if the HDMI switch can be powered by USB. While plugs are useful for some people, I have an Anker USB charging hub right near my switch, and having the ability

https://www.sony.com/electronics/support/articles/00013185
Disconnect the HDMI cable from your computer and the TV and then reconnect making sure the connections are secure. If the issue continues, try using a different HDMI cable. Try connecting your computer to a different HDMI port on your TV, and then change the TV input to match the port used. If you are using a VGA to HDMI adapter or something

https://www.alphr.com/computer-not-detecting-tv-through-hdmi/
Enabling the input signal function on your TV will help your PC detect it faster by strengthening your HDMI signal connection. Follow the steps below to execute this task: Select the "Home

https://www.youtube.com/watch?v=BvyyxnQBuYU
for more videos 👉 / @repairalltv for more firmware emmc pinout dump eeprom radio code go to our site. https://repairalltv.comTV does not connect to HDMI

https://www.samsung.com/uk/support/tv-audio-video/my-tv-does-not-detect-a-device-connected-via-hdmi/
Check the power of your external device. Check your TV Source settings. Check your HDMI cable. Use the HDMI Cable Test function for HDMI troubleshooting. Try connecting other devices. Note: If you are having trouble with your Samsung Smart TV, you should always check to see if there are any software updates available as these may contain a fix

https://plentyofgadgets.com/my-tv-doesnt-have-hdmi-arc/
HDMI, or High Definition Multimedia Interface, is the most widely used format in modern consumer goods for transferring high-definition video and audio from a device to your TV or monitor. Designed in 2002, HDMI has been available on most digital TVs and monitors since 2007. In the present day, most devices have more than one HDMI port.

https://robotpoweredhome.com/tv-doesnt-have-hdmi/
To connect your laptop to a TV without an HDMI port, follow these steps: Identify the kind of port that is on the back of your TV and make sure you have the necessary cables ready. You also need an HDMI cable to be able to connect your laptop. Make sure you have the necessary adapter to complete the connection to your TV.

https://plentyofgadgets.com/my-tv-doesnt-have-hdmi/
Connect the converter to a 5V power source, usually available in the display device, to make the converter work. 3. Use other older connectors: Composite cable, VGA, and DVI. Just like you can get a converter from any other technology to HDMI, you can also find one the other way around. If you are sure your TV does not have HDMI input, you are