HOMAG CENTATEQ N500/510 FLAT TABLE MACHINE (RAKE OFFLOADING)
www.exfactory.com/Detail/FT-010885 Specifications:
5' x 10' Flat Table "Bridge Gantry" machine with User-Friendly "MATRIX" grooved phenolic vacuum table.
Working Area:
"X" Axis is 122" (3,100 mm), "Y" axis 61" (1,550 mm), "Z" axis stroke is 13.7" (348 mm), max. material thickness of 3.9" (100 mm).
Positioning speed:
"X" & "Y" axis 315 FPM (96 MPM), "Z" axis is 82 FPM (25 MPM); machine head travels on THK linear motion guides on all axes.
Work Table:
User-Friendly "MATRIX" Pro Plus grooved phenolic multi-zone vacuum table with (11) Pneumatic locator 'zero-point' pop-up stops with Electronic surveillance of all stops.
By automatically selecting and deselecting the table field occupation, the vacuum is activated in the required area and is effective where it is needed. The areas are optimally matched to the established range of boards
During loading and positioning of the panel the side stop guides pop up & are above the level of the spoil board & lower automatically following the positioning of the panel & start signal.
The work table is suitable for inlaying of a rubber gasket material, clamping of templates or vacuum pods & can be divided into various vacuum areas for manual loading of individual part processing.
Boring Unit:
(1) 3 HP (2.3 kW) motor, variable speed fr 1,500 - 7,500 RPM; (7) independent "Quick Change" vertical spindles; (4) in "X" axis & (3) in "Y" axis.
Machining:
(1) 17.7 HP (13.2 kW) High-speed constant duty Router with HSK F63 adaptor;
Programmable speed from 1,250 - 24,000 RPM, constant torque achieved at 9,000 RPM, RH or LH rotation.
Router is powered by a 14 kW frequency inverter; integrated air-jet located in the extraction hood.
(1) 14-Position ATC plate mounted at the back of the machine.
Operator & Machine Control:
PC Front-End with WEEKE "Power Control with PowerTouch2" + Windows© + WoodWOP operating system.
21" TFT Color graphic touch-screen for data entry, PC 85T hand control pendant; Intel Core 2 Duo Processor; 1 SATA 160 GB hard disc; CD R/W drives,
EtherNET connection 10/100 MBIT RJ45 (without switch) for LAN connection to office PC, USB ports & central USB connection at the operating panel.
"BECKHOFF" Programmable logic control for (3/4) axes, linear, circular & helical interpolation;
The machine control is contained on a separate free-standing console that can be placed at either the LH or RH side of the machine.
WoodWOP can be programmed offline with the same intuitive icon-driven software that the operator has on the machine controller.
Complete with:
(1) 286 m³/Hr vacuum pump. Tool length touch-off probe. All-Zone Perimeter Safety System.
Actual Model is HOMAG CENTATEQ N500/510.
Note: Owner states "Purchased December, 2019 - arrived April, 2020 - sat in dry storage until installed June, 2022."
YouTube Comments - 0 Comments
Top Comments of this video!! :3