www.exfactory.com/detail/EO-012534 SNX nVISION System2 G3 CONTOUR EDGEBANDER + Optional Dual Telescoping Arms for simultaneous Contour Banding & Trimming. ≈≈ Specifications:
Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.
Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.
Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle. ≈≈ Working Capacity:
The "nVision" Contour Bander can band a minimum material size of 150 mm (6") diameter.
Maximum material size: 2,400 x 2,400 mm (94" x 94"); maximum material weight: up to 104.5 kG (230 Lbs).
Material thickness from: 10 - 60 mm (0.4" - 2.36"); banding thickness from: 0.5 mm thin tape w/low temp adhesive - 3 mm tape. ≈≈ Radii Capacity:
Minimum internal (inside) radius: 80 mm (3.14"); minimum external (outside) radius: 30 mm (1'18"), based on 1 mm thick edge tape.
● Edgebanding thickness: 1 mm, min = R 30 mm.
● Edge thickness: 2 mm, min = R 50 mm.
● Edge thickness: 3 mm, min = R 80 mm.
● Panel thickness: 10 - 60 mm with edge thickness 1 mm
● Panel thickness: 10 - 60 mm with edge thickness 2 mm
● Panel thickness: 10 - 45 mm with edge thickness 3 mm
IMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. ≈≈ Equipped with:
Thermal regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules.
(2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). ≈≈ Features: Laser for easy length identification with closed parts without the need for additional length measurement.
The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.
The machine is still equipped with the foot pedal for manual control/intervention.
Motorized turntable for automated edgebanding application to large panels.
Holding or support arm has a large inter-changeable vacuum pod to secure panels for edging and trimming.
NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. ≈≈ Complete with:
● Top & Bottom Trimming unit .● Centralized control panel with individual controls for all stations to enable manual feeding of panels if desired. ● Banding station. ● Edgebanding coil stand. ● Standard size vacuum pod for articulated arm. ● 80 mm (3") Dia. dust extraction outlet. ● Foot pedal activation/deactivation control. ● Larger feed roller. ● QC Glue tank with sensor. ≈≈ Options include:
(1) Additional Telescoping Actuator arm & foot pedal for simultaneous Contour Edge Banding &Trimming at the same time. ≈≈ Actual Model is: SNX nVISION System2 G3
YouTube Comments - 0 Comments
Top Comments of this video!! :3