10:52

DIY Sailboat - Sanding port hull

03:07

DIY Sailboat - Scribing a plank to fit hull curve.

20:54

DIY Sailboat - Flotation compartment supports.

12:51

DIY Sailboat - Adding a cedar plank to hull side.

07:36

DIY Sailboat - Ready for more hull planking.

03:37

DIY Sailboat - Fiberglass progress update

05:18

DIY Sailboat - How to remove uncured epoxy from tools. Acetone or Alcohol?

01:17:29

DIY Sailboat - Detailed fiberglass and peel ply session.

12:32

DIY Sailboat - The first fiberglass is applied to this homemade catamaran.

17:49

DIY Sailboat - Joining long boards for hull planking.

24:28

DIY Sailboat - Preparing for fiberglass and more cedar planking.

17:51

DIY Sailboat - Both hulls standing back to back

21:01

DIY Sailboat - Starboard hull matches port hull.

13:11

DIY Sailboat - Progress on the starboard hull.

14:51

DIY Sailboat - Port hull stands upright.

23:38

DIY Sailboat - Adding and shaping stringers.

21:33

DIY Sailboat - Setting the curved hull shape with flexible batons.

28:08

DIY Sailboat - First hull begins to take shape. Will it float?

10:35

DIY Sailboat - Stringers and bulkheads.

15:44

DIY Sailboat - Trial fitting hull bottom to hull side.

11:50

DIY Sailboat - Starboard hull side is done

10:01

DIY Sailboat - How to laminate plywood together for extra strength.

15:27

DIY Sailboat - Port hull side is done

08:57

DIY Sailboat - One hull side completely planked

12:32

DIY Sailboat - Back injury causes 6 week delay

10:54

DIY CNC - Mounting and adjusting limit switches.

14:07

DIY CNC - Mechanical complete milestone with chain drives.

35:10

DIY CNC - Installing stepper motors with custom mounts on CNC router.

07:15

DIY CNC - Gantry put together again and dry fitting router.

11:48

DIY CNC - Fixing a twisted CNC router torsion box table.

20:10

DIY CNC - Restarting an old CNC machine project. You can build this simple CNC with basic tools.

04:28

DIY Sailboat - Trimming hull bottom planks even with the plywood.

12:22

DIY Sailboat - Both hull bottoms are planked for better impact resistance.

11:38

DIY Sailboat - Gluing cedar planks to hull bottom.

07:45

DIY Sailboat - Scarfing and dry fitting cedar planks to prevent hull damage.

04:15

Removing cured epoxy with a carbide scraper.

08:46

Epoxy vs. vinylester heat resistance test with visible results.

12:55

DIY Sailboat - Destructive hull testing 3 different options.

05:55

How to remove amine blush so new epoxy will stick instead of coming apart.

15:12

DIY Sailboat - Making the keel bottoms.

10:45

DIY Sailboat - Mixing epoxy - silicone vs. plastic vs. paper containers.

19:57

DIY Sailboat - Epoxy hull sides and prepare cedar planking.

04:20

DIY Sailboat - Hull sides are cutout with gradual curves.

05:29

DIY Sailboat - Joining and gluing the outside hull sides.

06:09

DIY Sailboat - This is how to join the sailboat plywood sides.

21:58

DIY Sailboat - Failed test to route plywood joint using puzzle patterns.

26:54

DIY Sailboat - Making patterns to join plywood with overlapping puzzle piece half lap connection.

05:34

DIY Sailboat - Ready to build a catamaran sailboat in my garage.

07:11

DIY Sailboat - Halfway through the boat building platform.

04:48

DIY Sailboat - More progress on the boat building platform.

15:21

DIY Sailboat - The first pieces of the boat building platform are joined together.

05:55

Fixing a design flaw in the jig to cut notches in long boards.

20:51

Designing and building a jig to cut notches in long heavy boards.

01:56

DIY Sailboat - How to add wheels to the boat building platform.

11:50

DIY Sailboat - Platform lumber is now planed straight with constant width.

02:10

DIY Sailboat - Receiving the meranti marine plywood.

10:20

DIY Sailboat - Using practical trigonometry explained to calculate the space needed for the head.

07:43

DIY Sailboat - Planing long boards on small jointer with extra rollers.

14:20

DIY Sailboat - Planing long heavy board with small tabletop jointer.

03:41

DIY Sailboat - Why buy the head so soon?